PIXMA Pro9000: Head temperature sensor rank error

[rmaudsley]

Just started using PrintFab Pro XL 1.22.

For a few days all was well. Then I started getting this "Head temperature sensor rank error". I've order a replacement print head, but wondering if there is something else that can cause this or a easier fix than replacing the head.

[zedonet]

Hello, according to our experience this is a hardware problem in the print head that can be only solved by replacing the print head.

[rmaudsley]

This is what I gathered too. I have a replacement printhead arriving tomorrow.

[rmaudsley]

I replaced the Printer head, now I get Head ID error.

Is there anyway you can have the driver to ignore an error?

[rmaudsley]

I got a second print head. But now when I try to Print, PrintFab displays a message that my trial period is over in 12 days, then closes. I won't print anything.

[rmaudsley]

Uninstalled and Reinstalled Printfab. Now it prints after displaying the test period is about to end message. I added a custom page size of 13"x19" and trying to print to it. I now get this Error 1281.

[zedonet]

According to the Canon status code manual, the error code 1281 means "Front output tray in upper position". Please check if the output tray is open.