TurboPrint & PrintFab

Hi,

The printer stops around 55 minutes after start printing, but the print job is still going in my computer. I have to cut the paper so it can be ejected by the printer and once again I have to load the paper (roll) to continue the print job exactly where it stopped, then after 30 minutes it does the same thing again. And this can be a bucle because it keeps printing even when the specified copies are reached.

Software installed in my computer:
Windows 11 Home Single Language 23H2
PrintFab 1.22 (18-NOV-2023)
Epson L8050
Firmware ver. 07.68.TN23N6

Thank you for your time.

~ Fernando

Hello, we were already discussing this problem by email last year. Roll printing on Epson EcoTank desktop printers is an experimental feature and there are limitations, because the Epson printer firmware does not officially support roll printing. We have no solution for this problem yet.

Hi, May I know if there have been developments regarding this issue already? Thank you!

Hello, im am sorry but the situation is still the same. We think that it is a limitation in the printer firmware that cannot be solved in the printer driver. Keep in mind that the L8050 is not designed by Epson to print on roll paper.