Page 1 of 1
Printing on Canon S330 from gedit
Posted: Sat Sep 05, 2009 4:19 pm
by sigma
Hello,
Turboprint works fine on my computer, with Ubuntu 8.04, and various applications. One thing it won't do, however, is print from gedit. Any ideas or suggestions would be appreciated!
Posted: Tue Sep 08, 2009 9:11 am
by zedonet
Hello,
printing from gedit works well here - tested with TurboPrint 2.11 and Ubuntu 8.04.
You could mail the log files
/var/log/turboprint/print.log
/var/log/cups/error_log
after trying to print from gedit for closer investigation - send to
mail at zedonet dot de
(replace at with @ and dot with .).
resolved
Posted: Mon Oct 19, 2009 2:34 pm
by sigma
Embarrassingly, and after the last exchange, it turned out that gedit was set to print only page 2... and so, since most of my printing from gedit concerns very short documents, I was getting a blank page. I'm posting this up as resolved, just in case somebody has made the same mistake as me!
